94-Pu-237 JAEA+ EVAL-FEB10 O.Iwamoto,T.Nakagawa+
DIST-MAY10 20100303
----JENDL-4.0 MATERIAL 9431
-----INCIDENT NEUTRON DATA
------ENDF-6 FORMAT
History
07-05 Theoretical calculation was made with CCONE code.
07-10 Theoretical calculation was made with CCONE code.
Data were compiled as JENDL/AC-2008/1/.
10-02 Data of prompt gamma rays due to fission were given.
10-03 Covariance data were given.
MF= 1 General information
MT=452 Number of Neutrons per fission
Sum of MT's = 455 and 456.
MT=455 Delayed neutron data
(same as JENDL-3.3)
Determined from the systematics of Manero and Konshin /2/.
MT=456 Number of prompt neutrons per fission
(same as JENDL-3.3)
Determined from the data for Pu-239.
MF= 2 Resonance parameters
MT=151
No resolved resonance parameters
Thermal cross sections and resonance integrals (at 300K)
-------------------------------------------------------
0.0253 eV reson. integ.(*)
(barns) (barns)
-------------------------------------------------------
total 2507.1
elastic 11.12
fission 2295.6 1230
capture 200.1 113
-------------------------------------------------------
(*) In the energy range from 0.5 eV to 10 MeV.
MF= 3 Neutron cross sections
In the energy region below 0.3 eV:
Elastic scattering = 11.1 b which was estimated from R=9.397
fm calculated with CCONE code/3/.
Fission = 1/v shape with 2294 b /4,5/ at
0.0253 eV.
Capture = 1/v shape with 200 b at 0.0253 eV. The
thermal cross section was assumed from
capture to fission ratio at 1 eV and
thermal fission cross section.
Total = sum of these three cross sections.
Above 0.3 eV:
All the cross sections were calculated with CCONE code/3/.
MT= 1 Total cross section
The cross section was calculated with CC OMP of Soukhovitskii
et al./6/.
MT=18 Fission cross section
The simulated (n,f) cross sections of Britt and Wilhelmy/7/
were used to determine the parameters in the CCONE
calculation.
MF= 4 Angular distributions of secondary neutrons
MT=2 Elastic scattering
Calculated with CCONE code.
MT=18 Fission
Isotropic distributions in the laboratory system were assumed.
MF= 5 Energy distributions of secondary neutrons
MT=18 Prompt fission neutrons
Calculated with CCONE code.
MF= 6 Energy-angle distributions
Calculated with CCONE code.
Distributions from fission (MT=18) are not included.
MF=12 Photon production multiplicities
MT=18 Fission
Calculated from the total energy released by the prompt
gamma-rays due to fission which was estimated from its
systematics, and the average energy of gamma-rays.
MF=14 Photon angular distributions
MT=18 Fission
Isotoropic distributions were assumed.
MF=15 Continuous photon energy spectra
MT=18 Fission
Experimental data measured by Verbinski et al./8/ for
Pu-239 thermal fission were adopted.
MF=31 Covariances of average number of neutrons per fission
MT=452 Number of neutrons per fission
Sum of covariances for MT=455 and MT=456.
MT=455
Error of 15% was assumed.
MT=456
Covariance was obtained by fitting a linear function to the
at 0.0 and 5.0 MeV with an uncertainty of 5%.
MF=33 Covariances of neutron cross sections
Covariances were given to all the cross sections by using
KALMAN code/9/ and the covariances of model parameters
used in the cross-section calculations.
Covariances of the fission cross section were determined from
experimental data.
For the following cross sections, standard deviations in the
energy region below 0.3 eV were assumed as follows:
Total 25 %
Elastic scattering 50 %
Fission 27 % estimated from experimental data
Capture 50 %
MF=34 Covariances for Angular Distributions
MT=2 Elastic scattering
Covariances were given only to P1 components.
MF=35 Covariances for Energy Distributions
MT=18 Fission spectra
Estimated with CCONE and KALMAN codes.
*****************************************************************
Calculation with CCONE code
*****************************************************************
Models and parameters used in the CCONE/3/ calculation
1) Coupled channel optical model
Levels in the rotational band were included. Optical model
potential and coupled levels are shown in Table 1.
2) Two-component exciton model/10/
* Global parametrization of Koning-Duijvestijn/11/
was used.
* Gamma emission channel/12/ was added to simulate direct
and semi-direct capture reaction.
3) Hauser-Feshbach statistical model
* Moldauer width fluctuation correction/13/ was included.
* Neutron, gamma and fission decay channel were included.
* Transmission coefficients of neutrons were taken from
coupled channel calculation in Table 1.
* The level scheme of the target is shown in Table 2.
* Level density formula of constant temperature and Fermi-gas
model were used with shell energy correction and collective
enhancement factor. Parameters are shown in Table 3.
* Fission channel:
Double humped fission barriers were assumed.
Fission barrier penetrabilities were calculated with
Hill-Wheler formula/14/. Fission barrier parameters were
shown in Table 4. Transition state model was used and
continuum levels are assumed above the saddles. The level
density parameters for inner and outer saddles are shown in
Tables 5 and 6, respectively.
* Gamma-ray strength function of Kopecky et al/15/,/16/
was used. The prameters are shown in Table 7.
------------------------------------------------------------------
Tables
------------------------------------------------------------------
Table 1. Coupled channel calculation
--------------------------------------------------
* rigid rotor model was applied
* coupled levels = 0,1,2,5,8 (see Table 2)
* optical potential parameters /6/
Volume:
V_0 = 49.97 MeV
lambda_HF = 0.01004 1/MeV
C_viso = 15.9 MeV
A_v = 12.04 MeV
B_v = 81.36 MeV
E_a = 385 MeV
r_v = 1.2568 fm
a_v = 0.633 fm
Surface:
W_0 = 17.2 MeV
B_s = 11.19 MeV
C_s = 0.01361 1/MeV
C_wiso = 23.5 MeV
r_s = 1.1803 fm
a_s = 0.601 fm
Spin-orbit:
V_so = 5.75 MeV
lambda_so = 0.005 1/MeV
W_so = -3.1 MeV
B_so = 160 MeV
r_so = 1.1214 fm
a_so = 0.59 fm
Coulomb:
C_coul = 1.3
r_c = 1.2452 fm
a_c = 0.545 fm
Deformation:
beta_2 = 0.21978
beta_4 = 0.07667
beta_6 = -0.00869
* Calculated strength function
S0= 1.13e-4 S1= 2.86e-4 R'= 9.40 fm (En=1 keV)
--------------------------------------------------
Table 2. Level Scheme of Pu-237
-------------------
No. Ex(MeV) J PI
-------------------
0 0.00000 7/2 - *
1 0.04771 9/2 - *
2 0.10600 11/2 - *
3 0.14554 1/2 +
4 0.15545 3/2 +
5 0.17500 13/2 - *
6 0.20118 5/2 +
7 0.22425 7/2 +
8 0.25700 15/2 - *
9 0.28022 5/2 +
10 0.30400 9/2 +
11 0.32097 7/2 +
12 0.37040 3/2 +
13 0.37100 9/2 +
14 0.40419 5/2 +
15 0.40783 5/2 +
16 0.43841 7/2 +
17 0.45320 7/2 +
18 0.47350 7/2 +
19 0.48600 9/2 +
20 0.51300 9/2 +
21 0.54500 1/2 -
22 0.58200 5/2 -
23 0.59100 3/2 -
24 0.65500 7/2 +
25 0.65530 5/2 -
26 0.69100 7/2 -
27 0.69620 7/2 -
28 0.71600 13/2 -
29 0.74100 11/2 -
30 0.75700 21/2 +
-------------------
*) Coupled levels in CC calculation
Table 3. Level density parameters
--------------------------------------------------------
Nuclide a* Pair Eshell T E0 Ematch
1/MeV MeV MeV MeV MeV MeV
--------------------------------------------------------
Pu-238 18.3685 1.5557 1.9652 0.3804 0.0287 3.6608
Pu-237 18.3022 0.7795 1.8799 0.3586 -0.5090 2.5865
Pu-236 18.2358 1.5623 1.9752 0.3737 0.1216 3.5619
Pu-235 18.1694 0.7828 1.9791 0.3502 -0.4208 2.4828
Pu-234 18.1029 1.5689 2.1707 0.3732 0.1282 3.5689
--------------------------------------------------------
Table 4. Fission barrier parameters
----------------------------------------
Nuclide V_A hw_A V_B hw_B
MeV MeV MeV MeV
----------------------------------------
Pu-238 5.300 1.040 5.850 0.600
Pu-237 5.800 0.800 5.800 0.520
Pu-236 6.000 1.040 5.000 0.600
Pu-235 6.000 0.800 5.000 0.520
Pu-234 5.600 1.040 4.600 0.600
----------------------------------------
Table 5. Level density above inner saddle
--------------------------------------------------------
Nuclide a* Pair Eshell T E0 Ematch
1/MeV MeV MeV MeV MeV MeV
--------------------------------------------------------
Pu-238 22.9607 1.8150 2.6000 0.3084 -0.5296 3.8150
Pu-237 20.1324 0.9094 2.6000 0.3320 -1.5137 2.9094
Pu-236 20.0594 1.8226 2.6000 0.3326 -0.6004 3.8226
Pu-235 19.9863 0.9133 2.6000 0.3333 -1.5098 2.9133
Pu-234 19.9132 1.8304 2.6000 0.3339 -0.5927 3.8304
--------------------------------------------------------
Table 6. Level density above outer saddle
--------------------------------------------------------
Nuclide a* Pair Eshell T E0 Ematch
1/MeV MeV MeV MeV MeV MeV
--------------------------------------------------------
Pu-238 23.8791 1.8150 0.3400 0.3865 -0.5375 4.6150
Pu-237 20.1324 0.9094 0.3000 0.3706 -0.7963 2.9094
Pu-236 20.0594 1.8226 0.2600 0.3719 0.1175 3.8226
Pu-235 19.9863 0.9133 0.2200 0.3732 -0.7913 2.9133
Pu-234 19.9132 1.8304 0.1800 0.3744 0.1264 3.8304
--------------------------------------------------------
Table 7. Gamma-ray strength function for Pu-238
--------------------------------------------------------
K0 = 2.000 E0 = 4.500 (MeV)
* E1: ER = 10.90 (MeV) EG = 2.50 (MeV) SIG = 300.00 (mb)
ER = 13.80 (MeV) EG = 4.70 (MeV) SIG = 450.00 (mb)
* M1: ER = 6.62 (MeV) EG = 4.00 (MeV) SIG = 3.30 (mb)
* E2: ER = 10.17 (MeV) EG = 3.25 (MeV) SIG = 6.79 (mb)
--------------------------------------------------------
References
1) O.Iwamoto et al.: J. Nucl. Sci. Technol., 46, 510 (2009).
2) F. Manero, V.A. Konshin: At. Energy Review, 10, 637 (1972).
3) O.Iwamoto: J. Nucl. Sci. Technol., 44, 687 (2007).
4) J.E.Gindler et al.: Phys. Rev., 115, 1217 (1959).
5) E.K.Hulet et al.: WASH-1033, 28 (1961).
6) E.Sh.Soukhovitskii et al.: Phys. Rev. C72, 024604 (2005).
7) H.C.Britt, J.B.Wilhelmy: Nucl. Sci. Eng., 72, 222 (1979).
8) V.V.Verbinski et al.: Phys. Rev., C7, 1173 (1973).
9) T.Kawano, K.Shibata, JAERI-Data/Code 97-037 (1997) in
Japanese.
10) C.Kalbach: Phys. Rev. C33, 818 (1986).
11) A.J.Koning, M.C.Duijvestijn: Nucl. Phys. A744, 15 (2004).
12) J.M.Akkermans, H.Gruppelaar: Phys. Lett. 157B, 95 (1985).
13) P.A.Moldauer: Nucl. Phys. A344, 185 (1980).
14) D.L.Hill, J.A.Wheeler: Phys. Rev. 89, 1102 (1953).
15) J.Kopecky, M.Uhl: Phys. Rev. C41, 1941 (1990).
16) J.Kopecky, M.Uhl, R.E.Chrien: Phys. Rev. C47, 312 (1990).