| MT | Reaction | 0.0253-eV | Maxwellian Average |
g-factor | Resonance Integral |
14-MeV | Fis. Spec. Average |
|---|---|---|---|---|---|---|---|
| 1 | (n,total) | 44.20 (b) | 48.62 (b) | 1.100 | − | 1.999 (b) | 2.931 (b) |
| 2 | (n,elastic) | 34.16 (b) | 38.57 (b) | 1.129 | − | 800.5 (mb) | 2.385 (b) |
| 4 | (n,inelastic) | ( E-threshold = 129.2 keV ) | 455.9 (mb) | 455.5 (mb) | |||
| 16 | (n,2n) | ( E-threshold = 8.820 MeV ) | 437.1 (mb) | 359.6 (μb) | |||
| 22 | (n,na) | ( E-threshold = 7.856 MeV ) | 35.49 (mb) | 5.785 (μb) | |||
| 24 | (n,2na) | ( E-threshold = 16.01 MeV ) | − | 2.850 (pb) | |||
| 28 | (n,np) | ( E-threshold = 8.188 MeV ) | 121.1 (mb) | 46.72 (μb) | |||
| 32 | (n,nd) | ( E-threshold = 13.08 MeV ) | 21.90 (nb) | 40.60 (nb) | |||
| 41 | (n,2np) | ( E-threshold = 15.37 MeV ) | − | 12.21 (nb) | |||
| 102 | (n,γ) | 9.974 (b) | 9.980 (b) | 1.001 | 4.772 (b) | 440.5 (μb) | 1.316 (mb) |
| 103 | (n,p) | 46.69 (mb) | 46.72 (mb) | 1.001 | 960.8 (mb) | 62.88 (mb) | 57.53 (mb) |
| 104 | (n,d) | ( E-threshold = 5.901 MeV ) | 11.16 (mb) | 11.32 (μb) | |||
| 105 | (n,t) | ( E-threshold = 6.650 MeV ) | 638.6 (μb) | 837.3 (nb) | |||
| 106 | (n,He-3) | ( E-threshold = 12.17 MeV ) | 249.9 (pb) | 375.1 (pb) | |||
| 107 | (n,a) | 589.7 (μb) | 590.2 (μb) | 1.001 | 189.5 (mb) | 71.79 (mb) | 32.12 (mb) |
| 108 | (n,2a) | ( E-threshold = 8.320 MeV ) | 36.55 (nb) | 978.4 (pb) | |||
| 111 | (n,2p) | ( E-threshold = 11.48 MeV ) | 159.9 (nb) | 927.0 (pb) | |||
| 112 | (n,pa) | ( E-threshold = 7.286 MeV ) | 233.1 (μb) | 44.74 (nb) | |||
| 117 | (n,da) | ( E-threshold = 14.46 MeV ) | − | 11.48 (pb) | |||
|
These cross sections are calculated from JENDL-5 at 300K using with LINEAR, RECENT and SIGMA1 codes of PREPRO. For more detail, please click here.
The background color of each cell noted a cross section means the order of the cross-section value.
The unit of cross section, (b), means barns, and SI prefixes are used as following.
(kb) → 103(b), (mb) → 10−3(b), (μb) → 10−6(b), (nb) → 10−9(b), (pb) → 10−12(b), (fb) → 10−15(b)
MT is a number that defines a reaction type. For the relation between MT and reaction type, please see here or refer to the manual of ENDF formats.
|