| MT | Reaction | 0.0253-eV | Maxwellian Average |
g-factor | Resonance Integral |
14-MeV | Fis. Spec. Average |
|---|---|---|---|---|---|---|---|
| 1 | (n,total) | 3.091 (b) | 3.171 (b) | 1.026 | − | 2.644 (b) | 4.136 (b) |
| 2 | (n,elastic) | 609.3 (mb) | 687.9 (mb) | 1.129 | − | 1.229 (b) | 2.575 (b) |
| 4 | (n,inelastic) | ( E-threshold = 14.67 keV ) | 328.4 (mb) | 1.517 (b) | |||
| 16 | (n,2n) | ( E-threshold = 7.782 MeV ) | 989.4 (mb) | 1.578 (mb) | |||
| 17 | (n,3n) | ( E-threshold = 19.18 MeV ) | − | 120.4 (pb) | |||
| 22 | (n,na) | ( E-threshold = 7.449 MeV ) | 1.205 (mb) | 432.6 (nb) | |||
| 28 | (n,np) | ( E-threshold = 10.75 MeV ) | 6.195 (mb) | 1.804 (μb) | |||
| 32 | (n,nd) | ( E-threshold = 15.88 MeV ) | − | 133.7 (pb) | |||
| 41 | (n,2np) | ( E-threshold = 18.15 MeV ) | − | 1.816 (pb) | |||
| 102 | (n,γ) | 2.481 (b) | 2.483 (b) | 1.001 | 1.507 (b) | 937.3 (μb) | 2.095 (mb) |
| 103 | (n,p) | ( E-threshold = 1.947 MeV ) | 57.71 (mb) | 531.0 (μb) | |||
| 104 | (n,d) | ( E-threshold = 8.482 MeV ) | 1.802 (mb) | 360.3 (nb) | |||
| 105 | (n,t) | ( E-threshold = 9.514 MeV ) | 39.03 (μb) | 10.49 (nb) | |||
| 106 | (n,He-3) | ( E-threshold = 12.14 MeV ) | 5.1e-16 (b) | 916.7 (fb) | |||
| 107 | (n,a) | 267.8 (nb) | 268.0 (nb) | 1.000 | 5.236 (mb) | 29.04 (mb) | 416.8 (μb) |
| 108 | (n,2a) | ( E-threshold = 5.627 MeV ) | 172.1 (pb) | 13.16 (pb) | |||
| 111 | (n,2p) | ( E-threshold = 11.61 MeV ) | 1.230 (pb) | 20.45 (pb) | |||
| 112 | (n,pa) | ( E-threshold = 10.15 MeV ) | 3.137 (fb) | 8.443 (pb) | |||
|
These cross sections are calculated from JENDL-5 at 300K using with LINEAR, RECENT and SIGMA1 codes of PREPRO. For more detail, please click here.
The background color of each cell noted a cross section means the order of the cross-section value.
The unit of cross section, (b), means barns, and SI prefixes are used as following.
(kb) → 103(b), (mb) → 10−3(b), (μb) → 10−6(b), (nb) → 10−9(b), (pb) → 10−12(b), (fb) → 10−15(b)
MT is a number that defines a reaction type. For the relation between MT and reaction type, please see here or refer to the manual of ENDF formats.
|